Skip to content
Description
A Better Sealing Solution To All Tubeless Tire Puncture!
“Very easy to use! No more fighting to get the plug into the hole and get it to stay while trying to pull or remove the insertion tool. I have used it 3 times so far on Off-road Side x Side tires with no problems. Each plug worked 1st try with no glue or sticky stuff to deal with. Recommending this to all of my riding buddies!” - Jordan E.
Why Buy Our Tire Puncture Tool With Mushroom Plugs?
✅RELIABLE: The whole kit comes with all the tools essential for fixing a tire puncture, and it comes in a carry pouch for easy transport. It uses a spring-loaded gun that "drives" the plug into the hole to fix your puncture without removing the wheel and putting in any extra effort.
✅SECURE: This kit’s mushroom-shaped plugs are made of a unique combination of rubber that does not wear out with time compared to conventional puncture strips. It also fixes the puncture from the inside, and the stem of the plug seals the line of the puncture for a secured and sealed tire.
✅WIDE APPLICATION: It is user-friendly and has a compact size, which makes it portable for long journeys. Suitable for all tubeless tires, such as cars, motorcycles, off-road vehicles, commercial fleet trucks, and more.
❗REMINDERS❗
- This kit is considered a temporary repair on all street vehicles. No rubber cement or lubricant is necessary. Place the open bag of plugs in a zip-lock bag to keep them lubricated.
- Do not attempt to repair punctures greater than 5/16th inch (7mm). "On the wheel" repairs are classified as an emergency only.
- The tire must not be run for more than 100 miles at speeds no greater than 50 mph until the tire is dismounted, inspected, and permanently repaired or replaced.
📋Frequently Asked Questions:
Q: Do you put glue on the plugs?
A: No, the plugs don't have glue but a silicon coating.
Q: How to use this?
A:
- Find the puncture and remove any nail/needle from the affected area.
- Use a reamer to clean any burr or wires from the puncture hole.
- Push the mushroom into the plugger with the help of the nozzle without touching the head.
- Load the mushroom plug into the gun tool from the top. Make sure it goes completely inside the gun tool.
- Insert the nozzle into the tire using the probe tool. Unscrew the probe tool to leave the nozzle in the tire.
- Screw the gun into the nozzle and push the trigger on the gun to insert the mushroom plug until it stops.
- To remove the gun and nozzle from the tire, push the button at the end of the gun to pull it out, then pull the gun and nozzle from the tire.
- The puncture hole is now fixed with the mushroom plug.
- Inflate the tire and cut out the extra stem of the mushroom plug.
GRAB YOURS NOW!
Customer Reviews
I found a small nail in the rear tire of my FJR1300, left of center. The tire was fairly new, so I wanted to plug it in rather than replace it. I liked the idea of the mushroom plugs rather than the 'ropes' of the less-expensive kits. The kit is fairly easy to understand and use. This was perfect, as the back end of the mushroom plug was sticking out of the tire after I removed the nozzle. Using the included knife to cut this part of the plug off was simple, and I was ready to roll pretty quickly. The kit doesn't include a way to inflate the tire, so having a portable air system for when you're on the road is a must. I inflated the tire and let it sit overnight; the next morning, there was no appreciable loss of air in the tire. I was a little nervous during the first ride on the repaired tire, but everything went well. I've put about 400 miles on the tire since the repair, and feel very confident that the repair will be good until the tire itself wears out. I highly recommend this product!
Having successfully used the old style messy gooey type of plug for years, I wanted to try something a little cleaner. The tools that are included in this kit are heavy-duty and seem quite durable. The screw-in design of the tool makes it fairly easy to get the plug inside. At first, I wasn't sure that I had a good seal but after several days, the pressure seemed to have held. Now, months later, the plug is still holding.
Just plugged my motorcycle tire so far so good. Was super easy and fast to use. The tire is still holding air I will post an update if it changes but this was definitely a good buy that saved me tons of money!
Got a flat while riding on my Honda ST1300. Used the standard rope plug to repair. Rode about 25 miles, and the plug was gone. Inserted another rope plug, and rode another 15 miles home, and that plug was working its way out. Used this mushroom plug kit and installed the plug, no leaks, and easier to install. Several days now and still holding until a new tire arrives. I feel much more confident in this product.
These plugs worked great to repair the screw puncture in my rear motorcycle tire. The kit has very good directions for use of the tool and got it right the first time it was used. Comes in a zip-up case that will keep in the saddle bag from now on. Big upgrades over string plugs have been used in the past.
